Diy Industrial Coffee Table With Plumbing Pipe Base
Introduction
Are you looking to add an industrial touch to your living room? A DIY industrial coffee table with a plumbing pipe base is a perfect addition to your décor. It is a simple and affordable project that will give your living room a unique and stylish look.
Materials Required
To build a DIY industrial coffee table, you will need the following materials:
- 2x12 wood board
- Plumbing pipes (1-inch diameter)
- Elbow joints
- Flanges
- Wood screws
- Stain or paint
- Clear coat
- Drill
- Saw
Step by Step Guide
Step 1: Cut the Wood Board
Using a saw, cut the wood board to the desired size of your coffee table. Then, sand the edges and surface of the board to make it smooth.
Step 2: Stain or Paint the Wood Board
If you prefer a stained look, apply your preferred stain to the wood board. Otherwise, paint the board with your desired color. Allow the stain or paint to dry completely.
Step 3: Attach the Flanges to the Wood Board
Flip the wood board upside down and attach the flanges to the four corners of the board using wood screws. Ensure that the flanges are evenly spaced and aligned.
Step 4: Assemble the Plumbing Pipe Base
Using the plumbing pipes, elbow joints, and flanges, assemble the base of the coffee table. Ensure that the pipes are cut to the correct length and that the base is level. Once assembled, attach the base to the flanges on the wood board.
Step 5: Apply Clear Coat
Finally, apply a clear coat to protect the wood and plumbing pipes from wear and tear. Allow the clear coat to dry for at least 24 hours before using your new DIY industrial coffee table.
Conclusion
A DIY industrial coffee table with a plumbing pipe base is a simple and affordable project that can add a unique and stylish touch to your living room décor. By following these steps, you can create a coffee table that is both functional and visually appealing.